# 7" TFT Display

> 7-inch IPS LVDS display, 1024 x 600, 1500 cd/m² (nits) Sunlight Readable.

Source: https://digiwise.asia/products/7-tft-display-5
Category: tft-displays

## Description

The 7" TFT Display is a 7-inch IPS display module with 1024 x 600 resolution and LVDS connectivity. It delivers 1500 cd/m² (nits), rated Sunlight Readable, across a wide -20 ~ +70 (℃) operating range. With a 16:9 aspect ratio and IPS wide viewing angles, it suits industrial, embedded and LVDS display applications.

## At a glance

- Size: 7"
- Aspect Ratio: 16:9
- Resolution: 1024 x 600
- Brightness: 1500 cd/m² (nits)
- Interface: LVDS
- Operating Temp: -20 ~ +70 (℃)

## Specifications

| Specification | Value |
| --- | --- |
| Model number | 13-070XIEXXXXXXX |
| Size | 7" |
| Resolution | 1024 x 600 |
| Interface | LVDS |
| Brightness | 1500 cd/m² (nits) |
| Touch | Non-touch |
| Active display width | 154.21 mm |
| Aspect Ratio | 16:9 |
| Viewing Direction | IPS |
| Outline Dimension | 165 x 104 x 5 mm / 6.50 x 4.09 x 0.20 inch |
| Active Area | 154.21 x 85.92 mm / 6.07 x 3.38 inch |
| Operating Temperature | -20 ~ +70 (℃) / -4 ~ +158 (℉) |
| Storage Temperature | -30 ~ +80 (℃) / -22 ~ +176 (℉) |

## Highlights

### 1500 cd/m² — Sunlight Readable

Three times a standard 500 cd/m² panel.

### 5 mm panel body

Glass and backlight stack in a 165 x 104 mm outline.

### LVDS interface

Differential pairs from the host, with no converter stage.

### 1024 x 600 IPS

0.1506 × 0.1432 mm pixel pitch on a 154.21 x 85.92 mm active area.

### LED backlight from your board

The panel carries the LEDs; drive conditions are in the datasheet.

### -20 ~ +70 (℃) operating

Storage -30 ~ +80 ℃.

## Overview

### A 7" WSVGA panel at 1500 cd/m², 5 mm thick

This 7" TFT Display is a bare panel: a 7-inch IPS panel at 1024 x 600 with its own driver circuitry, an LVDS interface and a 5 mm body.

At 1500 cd/m² (nits) it sits in Sunlight Readable, the top of our five brightness tiers — three times a standard 500 cd/m² panel.

![](https://digiwise.asia/api/uploads/5b85f73254b24534842ab7de4f36d9b4.png)

#### 1500 cd/m² in a 5 mm stack

The whole panel is 5 mm through, with the LEDs brought out for drive from the host board.

IPS holds colour and contrast well off-axis, so the image reads the same square on or from the side.

### Straight onto your board

1024 x 600 on a 154.21 x 85.92 mm active area gives a 0.1506 × 0.1432 mm pixel. The panel takes that image over LVDS, direct from the display output on an SBC, a SoM or an FPGA.

![](https://digiwise.asia/api/uploads/16db11e3-bab2-4136-904d-3309a23b1d0a.webp)

- No conversion stage. LVDS arrives at the panel as it leaves the host, with no bridge or scaler board in the path.

- Driver circuitry on the panel. The host supplies the pixel data and the timing. The datasheet gives the interface timings and the panel's supply and control lines.

- Fewer conductors than parallel RGB. Differential pairs instead of a wide parallel bus, so the run from the host board to the panel is a small number of conductors.

- LED backlight from your board. The panel carries the LEDs; the constant-current drive comes from the host, and the drive conditions are in the datasheet.

### Display performance

| Parameter | Specification |
| --- | --- |
| Resolution | 1024 x 600 (WSVGA) |
| Aspect ratio | 16:9 |
| Active area | 154.21 x 85.92 mm / 6.07 x 3.38 inch |
| Pixel pitch | 0.1506 × 0.1432 mm |
| Panel technology | IPS |
| Brightness | 1500 cd/m² (nits) typical, at the rated backlight current — Sunlight Readable |
| Backlight | LED backlight, driven from the host board (drive conditions in the datasheet) |
| Interface | LVDS |
| Touch | Non-touch |

### Mechanical and environmental

The active area sits 154.21 x 85.92 mm inside a 165 x 104 mm outline.

![](https://digiwise.asia/api/uploads/a403a2b5-1f74-4359-8a21-3ddc1401ec47.webp)

The drawing gives the outline and the active area to scale. The official mechanical drawing carries the tolerances and the FPC and connector detail.

| Parameter | Specification |
| --- | --- |
| Outline dimension | 165 x 104 x 5 mm / 6.50 x 4.09 x 0.20 inch |
| Operating temperature | -20 ~ +70 (℃) / -4 ~ +158 (℉) |
| Storage temperature | -30 ~ +80 (℃) / -22 ~ +176 (℉) |

### Supply over the life of your product

A panel chosen at board level stays in the design for as long as the product ships, which makes the supply arrangement part of the specification rather than a detail after it.

This panel is one of over 500 standard models we hold, with 3–5 year lifecycle support, and changes are notified under our ECN process rather than arriving in a delivery. For programmes that run longer than that, tell us the horizon and we will plan the supply with you from the start.

### Where it is used

At 7" and 1500 cd/m² in a 5 mm stack, this panel suits bright positions where the front assembly has to stay shallow.

| Application | What this panel brings to it |
| --- | --- |
| Daylight-exposed industrial equipment | 1500 cd/m², three times a standard 500 cd/m² panel |
| Handheld and portable terminals | A shallow stack with a 1024 x 600 read-out |
| Off-highway and agricultural machinery | A bright screen for an open or glazed cab |
| Panel-mounted controls with a remote board | An LVDS run from a processor board mounted elsewhere in the enclosure |
| Transport and passenger information | A wide read-out that holds its contrast off-axis |
| Transport and fleet equipment | A 1500 cd/m² IPS window on a board-level interface |

A TTL version of this panel is available as a standard model, as are versions with projected-capacitive touch.

### Customisation services

This panel can be adapted, or swapped for a closer fit from the range. We hold over 500 standard models from 3.5" to 21.5", and we adapt them — or design something new — around the enclosure and the environment you already have.

| Level | What we change | When it fits |
| --- | --- | --- |
| Adapt this panel | Backlight brightness and drive conditions, a cover lens or cover glass with printing and surface treatment, optical bonding, a touch layer, FPC length and connector type | The 7" panel suits the design, and the front or the connection needs adjusting |
| Re-specify from our range | A different size, resolution, brightness or temperature range, or another panel interface — TTL, MCU, LVDS or MIPI-DSI. HDMI and USB-C are available as complete modules | A neighbouring size, resolution, brightness or interface suits the design better |
| Design to your requirement | A driver board built to your interface, custom mechanical, panel sourcing and long-term supply planning for your programme | The design calls for something outside the standard range, or has to stay in production for many years |

An early idea is enough to start from — we can look at a requirement and come back with feasibility, cost and lead time.

Whatever we agree — brightness, temperature range, mechanical envelope, FPC and connector — is written down before anything is built, so the sample you approve is what later batches are made and inspected against.

### Next step

For a datasheet, interface timings, mechanical data, samples or a quotation, [contact us](https://digiwise.asia/contact). We are glad to talk through an application at any stage.

## Images

- https://digiwise.asia/api/uploads/5b85f73254b24534842ab7de4f36d9b4.png

---

Contact DigiWise: https://digiwise.asia/contact