# 5" TFT Touch Display

> 5-inch IPS TTL touch display, 800 x 480, 400 cd/m² (nits) Standard Brightness.

Source: https://digiwise.asia/products/5-tft-touch-display
Category: tft-displays

## Description

The 5" TFT Touch Display is a 5-inch IPS display module with 800 x 480 resolution and TTL connectivity. It integrates a 4W RTP touch panel and delivers 400 cd/m² (nits), rated Standard Brightness, across a wide -20 ~ +70 (℃) operating range. With a 16:9 aspect ratio and IPS wide viewing angles, it suits industrial, embedded and TTL touch display applications.

## At a glance

- Size: 5"
- Aspect Ratio: 16:9
- Resolution: 800 x 480
- Brightness: 400 cd/m² (nits)
- Interface: TTL
- Touch: 4W RTP
- Operating Temp: -20 ~ +70 (℃)

## Specifications

| Specification | Value |
| --- | --- |
| Model number | 13-050WISXXXXXXX |
| Size | 5" |
| Resolution | 800 x 480 |
| Interface | TTL |
| Brightness | 400 cd/m² (nits) |
| Touch | 4W RTP |
| Active display width | 108 mm |
| Aspect Ratio | 16:9 |
| Viewing Direction | IPS |
| Outline Dimension | 120.7 x 75.8 x 4.25 mm / 4.75 x 2.98 x 0.17 inch |
| Active Area | 108 x 64.8 mm / 4.25 x 2.55 inch |
| Operating Temperature | -20 ~ +70 (℃) / -4 ~ +158 (℉) |
| Storage Temperature | -30 ~ +80 (℃) / -22 ~ +176 (℉) |

## Highlights

### 4-wire resistive touch

Analog tail to your touch controller; works through a glove or with a stylus.

### 800 x 480 at 188.1 PPI

0.135 mm pixel pitch on a 108 x 64.8 mm active area.

### TTL (parallel RGB)

Straight from the host display controller, with no converter stage.

### 400 cd/m² typical

Specified for indoor and panel-mounted equipment.

### 120.7 x 75.8 x 4.25 mm

Glass, backlight and touch layer in one stack.

### -20 ~ +70 (℃) operating

Storage -30 ~ +80 ℃.

## Overview

### A 5" panel with 4-wire resistive touch

This 5" TFT Touch Display is a bare panel with a touch layer: a 5-inch IPS panel at 800 x 480 with its own driver circuitry, a parallel TTL interface, and a 4-wire resistive touch panel over the front.

At 400 cd/m² (nits) it is specified for indoor and panel-mounted equipment, in a 4.25 mm body.

![](https://digiwise.asia/api/uploads/71bdfe0836d84964822f08621d80625f.png)

#### Touch laminated over an 800 x 480 panel

The resistive layer is assembled over the display at the factory, so the glass, the backlight and the touch arrive as one part number at a 0.135 mm pixel pitch.

IPS holds colour and contrast well off-axis, so the image reads the same square on or from the side.

### Straight onto your board

The panel takes parallel RGB direct from the display controller on an SBC, an MCU or a system-on-module, and the touch layer brings out its own 4-wire tail.

![](https://digiwise.asia/api/uploads/749f9d5b-9180-4851-8f73-668acfccd3d7.webp)

- No conversion stage. Parallel RGB arrives at the panel as it leaves the display controller, with no bridge or scaler board in the path.

- Driver circuitry on the panel. The host supplies the pixel data and the timing — clock, sync and data enable. The datasheet gives the interface timings and the panel's supply and control lines.

- Touch is a 4-wire analog tail. X+, X−, Y+ and Y− come out on the touch panel's own tail and go to a touch controller — an IC on your board reading over I2C or SPI, an MCU's own ADC channels, or a USB touch controller — ask us what suits the host.

- 4.25 mm panel body. The glass, backlight and touch stack, with the LED backlight driven from your board.

### Resistive touch

A 4-wire resistive layer responds to pressure rather than to a conductive touch, so a work glove, a stylus or the back of a tool registers as readily as a bare finger.

### Display performance

| Parameter | Specification |
| --- | --- |
| Resolution | 800 x 480 (WVGA) |
| Aspect ratio | 16:9 |
| Active area | 108 x 64.8 mm / 4.25 x 2.55 inch |
| Pixel pitch | 0.135 mm (≈ 188.1 PPI) |
| Panel technology | IPS |
| Brightness | 400 cd/m² (nits) typical, at the rated backlight current — Standard Brightness |
| Backlight | LED backlight, driven from the host board (drive conditions in the datasheet) |
| Interface | TTL (parallel RGB) |
| Touch | 4-wire resistive (4W RTP), analog tail to your touch controller |

### Mechanical and environmental

The panel body measures 120.7 x 75.8 mm and is 4.25 mm thick with the touch layer.

![](https://digiwise.asia/api/uploads/ad49fbe1-f3f8-4a5c-856d-0e88c72df713.webp)

The drawing gives the outline and the active area to scale. The official mechanical drawing carries the tolerances and the FPC and connector detail.

| Parameter | Specification |
| --- | --- |
| Outline dimension | 120.7 x 75.8 x 4.25 mm / 4.75 x 2.98 x 0.17 inch |
| Operating temperature | -20 ~ +70 (℃) / -4 ~ +158 (℉) |
| Storage temperature | -30 ~ +80 (℃) / -22 ~ +176 (℉) |

### Designed in at board level

Designing a panel in at board level makes its thickness, its interface and its mounting part of your mechanical design rather than choices you can revisit late, which is worth settling before the enclosure is cut.

Changes are notified under our ECN process rather than arriving in a delivery. Tell us the volumes and the horizon you are planning for and we will confirm the current revision and plan the supply with you.

### Where it is used

At 5" with pressure-activated touch, this panel suits equipment operated by hand, indoors or in a cabinet.

| Application | What this panel brings to it |
| --- | --- |
| Machine HMI and operator panels | Touch that works through a work glove, on a board-level interface |
| Laboratory and bench instruments | 800 x 480 with stylus input, driven from the instrument's own processor |
| Building controls and access panels | A compact touch screen in a 4.25 mm stack |
| Vending and dispensing equipment | A touch front end for an indoor door assembly |
| Portable and handheld terminals | Pressure-activated entry that works with a gloved hand |
| Service and diagnostic panels | A screen operated with whatever the technician is holding |

### Customisation services

This panel can be adapted, or swapped for a closer fit from the range. We hold over 500 standard models from 3.5" to 21.5", and we adapt them — or design something new — around the enclosure and the environment you already have.

| Level | What we change | When it fits |
| --- | --- | --- |
| Adapt this panel | Cover glass thickness, shape and printing, surface treatment, optical bonding, touch tuning for gloves and water, backlight brightness and drive conditions, FPC length and connector type | The 5" panel suits the design, and the front or the connection needs adjusting |
| Re-specify from our range | A different size, resolution, brightness or temperature range, or another panel interface — TTL, MCU, LVDS or MIPI-DSI. HDMI and USB-C are available as complete modules | A neighbouring size, resolution, brightness or interface suits the design better |
| Design to your requirement | A driver board built to your interface, custom mechanical, panel sourcing and long-term supply planning for your programme | The design calls for something outside the standard range, or has to stay in production for many years |

An early idea is enough to start from — we can look at a requirement and come back with feasibility, cost and lead time.

Whatever we agree — brightness, temperature range, mechanical envelope, touch behaviour, FPC and connector — is written down before anything is built, so the sample you approve is what later batches are made and inspected against.

### Next step

For a datasheet, interface timings, mechanical data, samples or a quotation, [contact us](https://digiwise.asia/contact). We are glad to talk through an application at any stage.

## Images

- https://digiwise.asia/api/uploads/71bdfe0836d84964822f08621d80625f.png

---

Contact DigiWise: https://digiwise.asia/contact