# 5" TFT Display

> 5-inch IPS TTL display, 800 x 480, 1000 cd/m² (nits) High Brightness.

Source: https://digiwise.asia/products/5-tft-display-2
Category: tft-displays

## Description

The 5" TFT Display is a 5-inch IPS display module with 800 x 480 resolution and TTL connectivity. It delivers 1000 cd/m² (nits), rated High Brightness, across a wide -30 ~ +80 (℃) operating range. With a 16:9 aspect ratio and IPS wide viewing angles, it suits industrial, embedded and TTL display applications.

## At a glance

- Size: 5"
- Aspect Ratio: 16:9
- Resolution: 800 x 480
- Brightness: 1000 cd/m² (nits)
- Interface: TTL
- Operating Temp: -30 ~ +80 (℃)

## Specifications

| Specification | Value |
| --- | --- |
| Model number | 13-050WISXXXXXXX |
| Size | 5" |
| Resolution | 800 x 480 |
| Interface | TTL |
| Brightness | 1000 cd/m² (nits) |
| Touch | Non-touch |
| Active display width | 108 mm |
| Aspect Ratio | 16:9 |
| Viewing Direction | IPS |
| Outline Dimension | 120.7 x 75.8 x 3.1 mm / 4.75 x 2.98 x 0.12 inch |
| Active Area | 108 x 64.8 mm / 4.25 x 2.55 inch |
| Operating Temperature | -30 ~ +80 (℃) / -22 ~ +176 (℉) |
| Storage Temperature | -30 ~ +80 (℃) / -22 ~ +176 (℉) |

## Highlights

### TTL (parallel RGB)

Straight from the host display controller, with no converter stage.

### 800 x 480 at 188.1 PPI

0.135 mm pixel pitch on a 108 x 64.8 mm active area.

### 1000 cd/m² — High Brightness

Twice a standard 500 cd/m² panel.

### -30 ~ +80 (℃) operating

Storage over the same -30 ~ +80 ℃ range.

### 120.7 x 75.8 x 3.1 mm

A 5" glass and backlight stack 3.1 mm thick.

### Non-touch

Panel only — a touch layer is one of the standard adaptations.

## Overview

### A 5" parallel-TTL panel at 1000 cd/m²

This 5" TFT Display is a bare panel: a 5-inch IPS panel at 800 x 480 with its own driver circuitry, a parallel TTL interface and a 3.1 mm body. It takes video directly from a host display controller, with no converter stage in between.

At 1000 cd/m² (nits) it is rated High Brightness on our scale — twice a standard 500 cd/m² panel — over a -30 ~ +80 (℃) range in both operation and storage.

![](https://digiwise.asia/api/uploads/62583d3235784e4f851d44c42607ad08.png)

#### 188 pixels per inch on a 5" panel

800 x 480 across a 108 x 64.8 mm active area is a 0.135 mm pixel — about 188 pixels per inch, which keeps small type and thin rules clean at close reading distance.

IPS holds colour and contrast well off-axis, so the image reads the same square on or from the side.

### Straight onto your board

The panel takes parallel RGB direct from the display controller on an SBC, an MCU or a system-on-module.

![](https://digiwise.asia/api/uploads/7f3cff94-815f-48cf-bb75-9174b1e4d464.webp)

- No conversion stage. Parallel RGB arrives at the panel as it leaves the display controller, with no bridge or scaler board in the path.

- Driver circuitry on the panel. The host supplies the pixel data and the timing — clock, sync and data enable. The datasheet gives the interface timings and the panel's supply and control lines.

- Native to the processor. Parallel RGB is a display output an SoC or MCU commonly exposes without an extra bridge.

- 3.1 mm panel body. The glass and backlight stack, with the LED backlight driven from your board.

### Display performance

| Parameter | Specification |
| --- | --- |
| Resolution | 800 x 480 (WVGA) |
| Aspect ratio | 16:9 |
| Active area | 108 x 64.8 mm / 4.25 x 2.55 inch |
| Pixel pitch | 0.135 mm (≈ 188.1 PPI) |
| Panel technology | IPS |
| Brightness | 1000 cd/m² (nits) typical, at the rated backlight current — High Brightness |
| Backlight | LED backlight, driven from the host board (drive conditions in the datasheet) |
| Interface | TTL (parallel RGB) |
| Touch | Non-touch |

### Mechanical and environmental

The panel body measures 120.7 x 75.8 mm and is 3.1 mm thick.

![](https://digiwise.asia/api/uploads/441d4ad8-a391-41e4-9923-72783774b16e.webp)

The drawing gives the outline and the active area to scale. The official mechanical drawing carries the tolerances and the FPC and connector detail.

| Parameter | Specification |
| --- | --- |
| Outline dimension | 120.7 x 75.8 x 3.1 mm / 4.75 x 2.98 x 0.12 inch |
| Operating temperature | -30 ~ +80 (℃) / -22 ~ +176 (℉) |
| Storage temperature | -30 ~ +80 (℃) / -22 ~ +176 (℉) |

### Designed in at board level

Designing a panel in at board level makes its thickness, its interface and its mounting part of your mechanical design rather than choices you can revisit late, which is worth settling before the enclosure is cut.

Changes are notified under our ECN process rather than arriving in a delivery. Tell us the volumes and the horizon you are planning for and we will confirm the current revision and plan the supply with you.

### Where it is used

At 5" and 3.1 mm on a parallel bus, this panel suits equipment built around a processor that drives the display directly.

| Application | What this panel brings to it |
| --- | --- |
| Handheld and portable instruments | A 0.135 mm pixel for dense numeric read-outs in a small body |
| Building controls and thermostats | A shallow front assembly for a wall-mounted enclosure |
| Machine control panels with physical keys | A bright status and menu screen beside the existing keypad or encoder |
| Metering and sub-metering | A compact read-out driven straight from the meter's processor |
| Off-highway and vehicle instrument panels | -30 ℃ operation for equipment started cold |
| Vending and dispensing equipment | A bright status display in a shallow door assembly |

An LVDS version of this panel is available as a standard model, as are TTL versions with resistive or projected-capacitive touch.

### Customisation services

This panel can be adapted, or swapped for a closer fit from the range. We hold over 500 standard models from 3.5" to 21.5", and we adapt them — or design something new — around the enclosure and the environment you already have.

| Level | What we change | When it fits |
| --- | --- | --- |
| Adapt this panel | Backlight brightness and drive conditions, a cover lens or cover glass with printing and surface treatment, optical bonding, a touch layer, FPC length and connector type | The 5" panel suits the design, and the front or the connection needs adjusting |
| Re-specify from our range | A different size, resolution, brightness or temperature range, or another panel interface — TTL, MCU, LVDS or MIPI-DSI. HDMI and USB-C are available as complete modules | A neighbouring size, resolution, brightness or interface suits the design better |
| Design to your requirement | A driver board built to your interface, custom mechanical, panel sourcing and long-term supply planning for your programme | The design calls for something outside the standard range, or has to stay in production for many years |

An early idea is enough to start from — we can look at a requirement and come back with feasibility, cost and lead time.

Whatever we agree — brightness, temperature range, mechanical envelope, FPC and connector — is written down before anything is built, so the sample you approve is what later batches are made and inspected against.

### Next step

For a datasheet, interface timings, mechanical data, samples or a quotation, [contact us](https://digiwise.asia/contact). We are glad to talk through an application at any stage.

## Images

- https://digiwise.asia/api/uploads/62583d3235784e4f851d44c42607ad08.png

---

Contact DigiWise: https://digiwise.asia/contact