# 4.3" TFT Display

> 4.3-inch IPS TTL display, 480 x 272, 600 cd/m² (nits) Bright Indoor.

Source: https://digiwise.asia/products/43-tft-display-3
Category: tft-displays

## Description

The 4.3" TFT Display is a 4.3-inch IPS display module with 480 x 272 resolution and TTL connectivity. It delivers 600 cd/m² (nits), rated Bright Indoor, across a wide -20 ~ +70 (℃) operating range. With a 16:9 aspect ratio and IPS wide viewing angles, it suits industrial, embedded and TTL display applications.

## At a glance

- Size: 4.3"
- Aspect Ratio: 16:9
- Resolution: 480 x 272
- Brightness: 600 cd/m² (nits)
- Interface: TTL
- Operating Temp: -20 ~ +70 (℃)

## Specifications

| Specification | Value |
| --- | --- |
| Model number | 13-043YISXXXXXXX |
| Size | 4.3" |
| Resolution | 480 x 272 |
| Interface | TTL |
| Brightness | 600 cd/m² (nits) |
| Touch | Non-touch |
| Active display width | 95.04 mm |
| Aspect Ratio | 16:9 |
| Viewing Direction | IPS |
| Outline Dimension | 105.5 x 67.2 x 2.9 mm / 4.15 x 2.65 x 0.11 inch |
| Active Area | 95.04 x 53.856 mm / 3.74 x 2.12 inch |
| Operating Temperature | -20 ~ +70 (℃) / -4 ~ +158 (℉) |
| Storage Temperature | -30 ~ +80 (℃) / -22 ~ +176 (℉) |

## Highlights

### 2.9 mm panel body

The glass and backlight stack, in a 105.5 x 67.2 mm outline.

### 480 x 272 IPS

0.198 mm pixel pitch (≈ 128.3 PPI) on a 95.04 x 53.856 mm active area.

### TTL (parallel RGB)

Straight from the host display controller, with no converter stage.

### 600 cd/m² — Bright Indoor

Above a standard 500 cd/m² panel.

### -20 ~ +70 (℃) operating

Storage -30 ~ +80 ℃.

### 95.04 x 53.856 mm active area

A 4.3" IPS window inside a 105.5 x 67.2 mm outline.

## Overview

### A 4.3" TTL panel, 2.9 mm thick

This 4.3" TFT Display is a bare panel: a 4.3-inch IPS panel at 480 x 272 with its own driver circuitry, a parallel TTL interface and a 2.9 mm body. It takes video directly from a host display controller, with no converter stage in between.

At 600 cd/m² (nits) it is rated Bright Indoor on our scale, in a 105.5 x 67.2 mm outline.

![](https://digiwise.asia/api/uploads/378028276e5847a69195f7bcafd1659a.png)

#### 2.9 mm of glass and backlight

The whole panel stack is 2.9 mm, which is what makes a 4.3" screen practical in a handheld instrument or behind a thin front panel.

IPS holds colour and contrast well off-axis, so the image reads the same square on or from the side.

### Straight onto your board

480 x 272 on a 95.04 x 53.856 mm active area gives a 0.198 mm pixel — about 128 pixels per inch. The panel takes that image over parallel TTL, direct from the display controller on an SBC, an MCU or a system-on-module.

![](https://digiwise.asia/api/uploads/6b2466a3-a02e-4711-9f29-724b7510fb87.webp)

- No conversion stage. Parallel RGB arrives at the panel as it leaves the display controller, with no bridge or scaler board in the path.

- Driver circuitry on the panel. The host supplies the pixel data and the timing — clock, sync and data enable. The datasheet gives the interface timings and the panel's supply and control lines.

- 480 x 272 over parallel TTL. A 0.198 mm pixel across a 95.04 x 53.856 mm active area, taken straight from the host's display output.

- 2.9 mm panel body. The glass and backlight stack, with the LED backlight driven from your board.

### Display performance

| Parameter | Specification |
| --- | --- |
| Resolution | 480 x 272 (WQVGA) |
| Aspect ratio | 16:9 |
| Active area | 95.04 x 53.856 mm / 3.74 x 2.12 inch |
| Pixel pitch | 0.198 mm (≈ 128.3 PPI) |
| Panel technology | IPS |
| Brightness | 600 cd/m² (nits) typical, at the rated backlight current — Bright Indoor |
| Backlight | LED backlight, driven from the host board (drive conditions in the datasheet) |
| Interface | TTL (parallel RGB) |
| Touch | Non-touch |

### Mechanical and environmental

The panel body measures 105.5 x 67.2 mm and is 2.9 mm thick.

![](https://digiwise.asia/api/uploads/6aae6f4e-20c2-45a2-a0c9-ee30e4228c99.webp)

The drawing gives the outline and the active area to scale. The official mechanical drawing carries the tolerances and the FPC and connector detail.

| Parameter | Specification |
| --- | --- |
| Outline dimension | 105.5 x 67.2 x 2.9 mm / 4.15 x 2.65 x 0.11 inch |
| Operating temperature | -20 ~ +70 (℃) / -4 ~ +158 (℉) |
| Storage temperature | -30 ~ +80 (℃) / -22 ~ +176 (℉) |

### Supply over the life of your product

A panel chosen at board level stays in the design for as long as the product ships, which makes the supply arrangement part of the specification rather than a detail after it.

This panel is one of over 500 standard models we hold, with 3–5 year lifecycle support, and changes are notified under our ECN process rather than arriving in a delivery. For programmes that run longer than that, tell us the horizon and we will plan the supply with you from the start.

### Where it is used

This panel suits indoor and panel-mounted equipment where the thickness of the front assembly matters.

| Application | What this panel brings to it |
| --- | --- |
| Handheld and portable instruments | A shallow stack for a body held in one hand |
| Building controls and thermostats | A shallow front assembly for a wall-mounted enclosure |
| Machine control panels with physical keys | A status and menu screen beside the existing keypad or encoder |
| Laboratory and bench instruments | Stable IPS colour for read-outs, driven from the instrument's own processor |
| Metering and sub-metering | A compact read-out on a narrow parallel bus |
| Vending and dispensing equipment | An indoor status display in a shallow door assembly |

Backlight brightness and a touch layer are both among the standard adaptations below.

### Customisation services

This panel can be adapted, or swapped for a closer fit from the range. We hold over 500 standard models from 3.5" to 21.5", and we adapt them — or design something new — around the enclosure and the environment you already have.

| Level | What we change | When it fits |
| --- | --- | --- |
| Adapt this panel | Backlight brightness and drive conditions, a cover lens or cover glass with printing and surface treatment, optical bonding, a PCAP touch layer tuned for gloves or a thicker front panel, FPC length and connector type | The 4.3" panel suits the design, and the front or the connection needs adjusting |
| Re-specify from our range | A different size, resolution, brightness or temperature range, or another panel interface — TTL, MCU, LVDS or MIPI-DSI. HDMI and USB-C are available as complete modules | A neighbouring size, resolution, brightness or interface suits the design better |
| Design to your requirement | A driver board built to your interface, custom mechanical, panel sourcing and long-term supply planning for your programme | The design calls for something outside the standard range, or has to stay in production for many years |

An early idea is enough to start from — we can look at a requirement and come back with feasibility, cost and lead time.

Whatever we agree — brightness, temperature range, mechanical envelope, FPC and connector — is written down before anything is built, so the sample you approve is what later batches are made and inspected against.

### Next step

For a datasheet, interface timings, mechanical data, samples or a quotation, [contact us](https://digiwise.asia/contact). We are glad to talk through an application at any stage.

## Images

- https://digiwise.asia/api/uploads/378028276e5847a69195f7bcafd1659a.png

---

Contact DigiWise: https://digiwise.asia/contact